Why Does Lumber Have Knots?

Knots form during the growing process of a tree. A tree grows in two different directions. First, it grows in height. As the tree grows in height, limbs start to form off the sides. These limbs are the source of knots. 

The second direction of growth is in diameter. When the tree grows in diameter, it starts to grow over the ends of pruned limbs. This growth creates an area of clear lumber, also known as the quality zone. The closer you get to the center of the tree, the more knots you will come across. This wood doesn’t just get thrown away. It gets used for products that require less length and width like flooring. Boards with many knots become industrial grade lumber for pallets and railroad ties. 

Knots affect the structural integrity of the wood. They are very brittle and easy to crack. They aren’t as big of a concern in furniture applications though when they provide character to a piece, making it different and unique. Many craftsmen fill the cracks or holes in the knots with epoxy or putty. 

Knots can cause problems. They are hard on tools and you can have more chip out and tear out around the knot. Knots are also very dense. Given this, make sure to have sharp tooling when working with material that has lots of knots. 

You May Also Like…

The Craftsman’s Notes: Butcher Block Desk Top

The Craftsman’s Notes: Butcher Block Desk Top

This was a slightly different project made in the Fine Craftsman Lumber Workshop. We needed another desk top, so we decided to take on the task. Here was our process: Butcher Block Instead of starting from scratch, we started with one of our butcher blocks. We make...

4 Tips for Storing Lumber

4 Tips for Storing Lumber

Wood can be super finicky when it comes to storing it. As a natural product, it reacts to the environment around it. As a woodworker, it is helpful to understand how wood reacts to its environment. From there, you can manipulate it to do what you want. Wood storage is...

What to do with Scrap Lumber?

What to do with Scrap Lumber?

Lumber is expensive. That's why it is important to reduce waste and use as much of each board as possible. Often, at the end of a project, you may find yourself looking for ways to utilize scrap pieces.  But finding those projects that utilize scraps can be somewhat...

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *

Pin It on Pinterest

Share This